NAME
viapm —
VIA SMBus controller and VIA
VT82C686A/VT8231 hardware monitor
SYNOPSIS
viapm* at pci?
iic* at viapm?
DESCRIPTION
The viapm driver provides support for the
bus control and power management component of the VIA VT82C596, VT82C596B,
VT82C686A, VT8231, VT8233, VT8233A, VT8235, VT8237, VT8237A, VT8237S,
VT8251, CX700, VX800, VX855 and VX900 South Bridges. Only the SMBus host
interface is supported and can be used with the
iic(4)
framework.
The viapm driver provides support for the
hardware monitor in the VIA VT82C686A and VT8231 South Bridges. The hardware
monitor is used with the sysctl(8) interface.
The device has 10 sensors:
| Sensor | Units | Typical Use |
TSENS1 |
uK | CPU temperature |
TSENS2 |
uK | System temperature |
TSENS3 |
uK | Unknown |
FAN1 |
RPM | CPU fan |
FAN2 |
RPM | System fan |
VSENS1 |
uV DC | CPU core voltage (2.0V) |
VSENS2 |
uV DC | North Bridge core voltage (2.5V) |
Vcore |
uV DC | Internal core voltage (3.3V) |
VSENS3 |
uV DC | +5V |
VSENS4 |
uV DC | +12V |
Sensor data is updated every 1.5 seconds.
SEE ALSO
HISTORY
The viapm driver first appeared in
OpenBSD 3.9.
The viaenv driver first appeared in
NetBSD 1.5. OpenBSD support
was added in OpenBSD 3.4.
AUTHORS
The viapm driver was written by
Mark Kettenis
<kettenis@openbsd.org>.
The viaenv driver was written by
Johan Danielsson and ported to
OpenBSD 3.4 by Alexander
Yurchenko
<grange@openbsd.org>.
It was merged with viapm in OpenBSD
5.0.
BUGS
The driver doesn't support commands with a data buffer size of more than 2 bytes.
Interrupt support is unimplemented, as is support for setting values.