OpenBSD manual page server

Manual Page Search Parameters

NE(4) Device Drivers Manual NE(4)

neNE2000 and compatible 10/100 Ethernet device

ne0 at isa? port 0x240 irq 9
ne1 at isa? port 0x300 irq 10
ne2 at isa? port 0x280 irq 9
ne* at isapnp?
ne* at pci?
ne* at pcmcia?
acphy* at mii?
bmtphy* at mii?
lxtphy* at mii?
nsphyter* at mii?

The ne device driver supports NE2000 and compatible (including NE1000) Ethernet cards, including:

PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
CF
CF
PCMCIA
CF
PCMCIA
PCMCIA
PCMCIA
PCI
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
CF
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCI
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCI
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCI
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
PCMCIA
CF
PCMCIA
PCI
PCMCIA
CF
PCMCIA
PCMCIA
CF
PCI
PCI
PCI
PCMCIA
PCMCIA

The Realtek 8019 (ISA, ISAPnP, some PCMCIA) and Realtek 8029 (PCI) NE2000-compatible Ethernet chips include support for software media selection. If one of these chips is detected by the driver, the list of supported media will be displayed.

For all other chips supported by the ne driver, media selection must be performed either via card jumper settings or by vendor-supplied configuration programs.

ne0: where did the card go?
The driver found the card, but was unable to make the card respond to complete the configuration sequence.

acphy(4), bmtphy(4), ifmedia(4), intro(4), isa(4), isapnp(4), lxtphy(4), netintro(4), nsphyter(4), pci(4), pcmcia(4), hostname.if(5), ifconfig(8)

September 3, 2011 OpenBSD-current