NAME
ebus —
introduction to SPARC EBus bus
support
SYNOPSIS
ebus* at pci?
ebus* at mainbus0
DESCRIPTION
The ebus bus is designed to provide the
ability to put ISA and traditional Intel-style peripherals in a SPARC based
system with a minimal amount of glue logic. Typically, it is implemented in
the PCIO IC from SME, which also implements an
hme(4)
compatible PCI network device
(‘network’). The
ebus has four DMA channels, similar to the DMA seen
in the esp(4)
SCSI DMA.
OpenBSD provides support for the following devices:
- audioce(4)
- SPARC64 EBus CS4231 audio device
- auxio(4)
- SPARC64 auxiliary I/O
- bbc(4)
- SPARC64 BootBus Controller
- beeper(4)
- console annunciator
- clock(4)
- real-time clock
- com(4)
- serial communications interface
- comkbd(4)
- serial keyboard driver
- comms(4)
- serial mouse driver
- led(4)
- SPARC64 LED driver
- lom(4)
- lights out management
- lpt(4)
- parallel port driver
- pcfiic(4)
- Philips PCF8584 I2C controller
- pckbc(4)
- PC (ISA) keyboard controller driver
- pmc(4)
- power management controller
- power(4)
- power button
- sab(4)
- Infineon SAB82532 (ESCC2) serial communications driver
- uperf(4)
- performance counters driver
- wbsd(4)
- Winbond W83L518D/W83L519D SD memory card interface
SEE ALSO
Sun Microelectronics, Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, http://www.sun.com/processors/manuals/802-7837.pdf, March 1997.